KV&O RS11 #431 switching out a couple bad orders.
Thursday, October 10, 2013
Tuesday, August 27, 2013
Portable Transformer car part 1
Had a good friend send me a picture of a portable transformer car. Found it to be pretty neat so I started planning. Here is what I come up with so far.
Locomotive Maintenance Part 3
Here the start of the asp pit and the water tower. I keep putting off the ash pit due to having to cut a small hole in the layout but once that was done it turned out pretty good.
Locomotive Maintenance Part 2
Got to work on the locomotive terminal a little more. Started the diesel fuel storage tank. Used an older Bachmann tanker and Walthers piping. The building is from a Bachmann kit but I don't remember the name of it. Also did piping on the sanding tower.
Sunday, August 25, 2013
Locomotive Maintenance Part 1
Started redoing my locomotive terminal for the past week so far this is what I have got completed.
Sanding Rack started out as an Atlas covered hopper that I got off eBay with a couple locomotives. It had some damage, and details were broken off. In June 2011 issue Model Railroader author Kazuo Terasawa did an article on kit-bashing a Modern Sand Tower. Since that article, I have been wanting to build one like it.
From the kit, I removed the grab irons some of the couple pockets and build a frame out of Plastruct material that the car could sit it. I then added handrails, roof vents, and piping.
I also detailed the coaling tower. Since I had the kit one thing about it I didn't like was the ladders. I am modeling between the 70s and 80s and I felt like they needed cages around them. I added Plastruct cage ladders. It took more then what I thought it would but I like how they look.
Next build is an asp pit, water tower(scratch built), and a diesel fuel storage tank (built from old tank car)
Sanding Rack started out as an Atlas covered hopper that I got off eBay with a couple locomotives. It had some damage, and details were broken off. In June 2011 issue Model Railroader author Kazuo Terasawa did an article on kit-bashing a Modern Sand Tower. Since that article, I have been wanting to build one like it.
From the kit, I removed the grab irons some of the couple pockets and build a frame out of Plastruct material that the car could sit it. I then added handrails, roof vents, and piping.
I also detailed the coaling tower. Since I had the kit one thing about it I didn't like was the ladders. I am modeling between the 70s and 80s and I felt like they needed cages around them. I added Plastruct cage ladders. It took more then what I thought it would but I like how they look.
Next build is an asp pit, water tower(scratch built), and a diesel fuel storage tank (built from old tank car)
Subscribe to:
Posts (Atom)


