KV&O RS11 #431 switching out a couple bad orders.
Showing posts with label Black Mountain yard. Show all posts
Showing posts with label Black Mountain yard. Show all posts

Wednesday, March 7, 2018

Story of KV&O #1791


Was out filming inbound and outbound trains at Black Mountain yards today when an older gentleman walked up to me and we started talking. The guy’s name was Sam Wiseman. He had worked for the KV&O when steam still ruled the rails. He told many stories but one that stood out was the day that a set of four FA diesels stalled on Black Mountain and one of the last operating steam locomotives come to shove the train over the mountain.

The was the fall of 1956 when C541 had doubled over 150 loads in Dent yards to take south to the interchange with C&O at Martin, KY. Headend power was 2 FAs and 2 FBs. This was a normal practice and nothing was any different about this day than others. Minutes before departing the 150 car train had been rerouted over Black Mountain on the Leatherwood branch. This was one of the steepest grades on the KV&O and a lot of the engineers did not like going up or down this mountain. Black Mountain was known for its electrification and some of the electrified locomotives that work here were brutes. But this day all electrification had been suspended due to upgrading generators in most substations along the line.

The engineer on C541 C. Harrison. Harrison was a newly promoted to engineer and still was pretty cocky and was ready to take the train up Black Mountain. Due to tonnage, it was suggested a pusher crew be put on duty and assist the crew up the Mountain. Not wanting to wait for the pusher crew Harrison was able to talk the dispatcher into letting him try the hill without a pusher. Only other train that would be on the line would be a Steam execution train pulled by KV&O #1791. It was a 2-8-8-2 that had not been taken out of service but only used for execution trains and for short local runs. It is also one of the last running articulated steams locomotives still on the KV&O. It was an hour or so behind schedule due to delays in getting out of Hazard yards, waiting on coal from a local dealer.

With the Okay C541 took off up the Leatherwood branch with there 4 engines and 150 loaded hoppers and caboose. The trip started out pretty good surprisingly. The way these 4 engines ran Harrison thought they would be able to make the mountain with no problem. At MP 0LF264 was when the grade really started getting steep, but the way the line was laid out, the train would have to go up a grade then they would enter a section of track that would level out and they would be able to get their speed back up before the next grade. 25 miles into the 125-mile run was when the problems started. At MP 0LF284 the 3rd unit a B unit shut down. The train was able to limp to one of the section of level track where Harrison could check the engine out. After a good look over, he found out the engine was running low on water and couldn’t be restarted. Harrison felt that he had enough power to make the rest of the hill but it would be slow. At MP 0LF286 the rear A unit shut down. With the smoke a rolling they knew what happened to that unit and there was no reason to check it out. Blown motor said, Harrison 4th unit back. So there they were stuck on the side of the Mountain dead in the water, not enough power to go forward and not enough power to go back to keep the train from running away downhill. Luckily there was a squawk box about a ¼ mile from where they were. With radio being new to the railroads KV&O depended on squawk boxes along the track. Squawk boxes are telephones that are a direct line to the dispatcher. So crew can get permission for track or report problems or emergencies. The conductor made his way to the squawk box and told the dispatcher of the situation. The only train that was between Dent yard and C541 was KV&O #1791 pulling the 11 car excursion train.

KV&O #1791 was stopped at MP 0LF274. With KV&O #1791 stopped and the conductor on the box, the news was told of the stalled train ahead. The excursion train included the president of the KV&O and with him being a railroad man he wanted to know what was going on, he made his way up to the engine and was told of the situation. The old head crew on 1791 was familiar with the situation and had run into it before but not with 150 loads. After a little decision, it was decided that they would assist the stalled train but the drawback of this was 1791 had to take the 11 pass car with it due to cold fall weather and steam from the engine is what kelp the cars warm. After a job briefing with C541 and a few comments made from Harrison about the old steamer not having power #1791 coupled to the rear of the train. With a long blow of the whistle to let the headend know they were ready Harrison eased into the throttle and released the brakes. With the weight of the train pulling back Harrison felt the train start to inch forward. 1791 started pushing from the rear and the slack could be heard slowly bunching up. With a bump felt from the rear C541 started picking up speed milepost by milepost the speed rose and by the time the summit of the mountain was reached they were at 15 MPH surprising that was pretty good from a train that starts from a dead stop. Once the siding was reached and C541 pulled their train into it to wait on a set of engines, Harrison turn in his seat and flipped a switch on the back panel of the locomotive. To this day the conductor said it was the run switch to the lead locomotive, which if this is true, only one unit on the head end was pulling from the head end, and 1791 was pushing the bulk of the train. When Harrison was asked about the switch his reply was “I can’t remember everything”. KV&O 1791 was never officially retired from service and to this day is considered one of the strongest locomotive KV&O owns.

(This is a story of fiction, names are made up, some places are real while others are not.)

Sunday, January 14, 2018

Railfanning January 14, 2018

Did a little railfanning in the Black Mountain yard today on the KV&O. Caught C862 coming in with a string of L&N hoppers. Once in the yard KV&O RS11 431 cut off came around got the cab off and set it over to the cab track and went in for sand and fuel. This train will be picked up by and L&N crew.

 
   



KV&O RS11 431 running back through the yard to pick up the can to set it off in the cab track. 



With the cab set off  431 heads to the to the service track for fuel and sand. 



Monday, October 30, 2017

Layout 10-30-17

Going through Black Mountian yard this morning before going to the doctors and found a couple L&N locomotives and a leased UP SD40-2. KV&O leased power from the UP, BN, and Santa Fe.





Tuesday, March 14, 2017

Railfanning March 6 2017

Railfanning around Black Mountain Yards and seen they brought the dynamometer car in. I'm guessing it is the test the transfer locomotive that is being built at the shops. After I got permission I got a few pictures







Diesel Shops and Turntable Part 7

I add a 6" x 4' section onto the area in front of the roundhouse so I was able to add 3 extra stalls to the roundhouse and 9 outside tracks. Next is to added details.



New hot metal cars

D&D Mining & Steel took delivery of 4 new hot metal cars. The following pictures are from the yard and one from the yard tower. With the new blast furnace and electric furnace up and running these are much-needed cars. Each car is different due to being tested in the mill to see which design will best work within the mill.

The cars are a combination of ST&D cars and spouts and Walthers cars. One car is a stock ST&D car while the Walthers car is stock except for the spout. The other 2 cars have the end platform changed out with each manufacturer. The paint is aluminum color.






Railfanning January 16 2017

Good friend Drayton Blackgrove owner of Delay in Block Production came over and ran his GP30 High nose on the KV&O. I will have to say this was the first time I have had someone bring their own power to run on my layout. It was nice to also get to talk to another model railroader in person. The lowered level of the layout is getting completed enough that multiple operators can run trains.

I did notice the aisle around the transfer table and north end of Black Mountain Yard can be a problem with multiple operators due to being kind of narrow.

I was also impressed with the GP30 with WOW Sound from TCS. I have a few locomotives with sound but none compared to WOW sound.

Here is D&S GP30 #2570 cutting off the empty coal train so the KV&O SD40-2 1259 can take it up the Leatherwood Branch loaded at Blue Diamond Loadout.


KV&O 1794

Found an old picture of KV&O 1794 coming through Black Mountain Yards with a passenger train special in tow.


Friday, December 16, 2016

12-15-16 2:35pm Another day of railfanning the KV&O

South end of the yard waiting on a crew is a string of L&N empties waiting to go back to the EK Division to be loaded with coal. Said the crew will be here in about 3:45. On the high line, a short train went buy with a high and wide in tow. We were really surprised when we saw a Davies Steel truck pull up to the KV&O shops.







12-15-16 1:15pm Another day of railfanning the KV&O

We made our way to the car shops and locomotive rebuilding shop and there was a lot of activity there. KV&O switcher S12 #41 was switching a depressed flat that had to have a couple wheels worked on for flat spots. Sitting beside the shops is a U5B locomotive that the K&VO purchased from Brazil. The locomotive was completely rebuilt and is waiting for lettering and numbers from the paint shop. Looks like they have already been testing it due to it being coupled to the dynamometer car. With its nose stuck out of the loco, rebuild shop is a British made locomotive that has been used at DDMS. It has been sent to the shops for a rebuild and repaint.






12-15-16 12:15pm Another day of railfanning the KV&O

After getting back from eating at the local dinner we headed back to the yards. The diesel service facility was quiet, there was 2 SD40-2 with a fuel tanker coupled between them. There was also an aging set of FA units. KV&O was known to use their locomotives as long as possible. Close to the diesel shops was the steam shops with all 3 bay door wide open. Couldn't tell what other units were in there but the unlettered locomotives was a Hudson that KV&O has been rebuilding and beside it was the articulated logging locomotive use on the old P&P logging.





12-15-16 10:15am Another day of railfanning the KV&O

We hear the daily hot metal train from DDMS was on its way and they had held the ore train in the siding to clear the main for it. While was waiting sitting on the highline was 2 of the KV&O SD26 units. Both in different paint schemes. The crew was waiting for a MOW crew to get out of the way.



12-15-16 8:35am Another day of railfanning the KV&O

When we first arrived to our surprise was an L&N geep setting on the ready tracks coupled to KV&O RS11 431. These were assigned to one of the daily ore trains D&D Mining & Steel plant. The set pulled out of the ready tracks but took a while getting onto their train. Once they got back we saw why. They had gotten the 3rd unit. A recently purchased slug unit from Helix Rail Grinding Systems (HRGX) Still wearing HRGX colors too.